fuesers garne check

our Products 

Corneta metallic yarn

Reinforced Yarn

fuesers garne check

MX

fuesers garne check
fuesers garne check

M-A-MX

fuesers garne check

NX

fuesers garne check

MX matt

fuesers garne check

MX FR

fuesers garne check

Reinforced yarn MX

Areas of Application:

Flat and circular knitting, large and narrow weaving, braiding, twisting, trimming and embroidery

Supporting the metallic tape increases its tensile strength significantly compared to the unsopported M-Type. MX is widely used in nearly all textile processing techniques.

Construction

Construction Scetch:

fuesers garne check

Metallised polyester film supported with 2 x 20 den polyamide monofilament. Available in thicknesses of 12 mic in all colours and 30 mic in iridescent. The standard widths used to be 0.25 and 0.37mm but we carry the 1/127" (are 0.20mm) as well.  Further widths are available upon request.

Composition:

Polyester/Polyamide

Dyeability:

With the exception of the colours transparent and iridescent, the metallic yarn usde to make the MX-Type is not guarantied to withstand a piece dyeing process.

Care Label:

fuesers garne pflege get in contact now
fuesers garne check

Reinforced yarn MXS

Areas of Application

Embroidery, knitting, weaving and braiding

This is an especially reinforced metallic yarn which has been finished to render a much higher tensile strength more customary for use in embroidery than in weaving.

construction

Construction Sketch:

fuesers garne check

Metallised polyester film available in 0,25 and 0,37 mm widths, reinforced by 2x45 den polyester multifilament

Material Composition:

100%Polyester

Dyeability:

With the exception of the colours transparent and iridescent, MXS yarn is not suitable for yarn or piece dyeing.

Care Label:

fuesers garne pflege get in contact now
fuesers garne check

Reinforced yarn M-A-MX

Areas of Application:

Weaving, knitting, twisting and trim manufacture 

This reinforced yarn can be used for all products which will be piece dyed and for those requiring exceptional stability. An extremely thin layer of aluminium foil is laminated on both sides with a dyed polyester film resulting in this material being somewhat rigid/stiff.

construction

Construction Sketch:

fuesers garne faden

Aluminium foil laminated on both sides with polyester film, inforced with 2x20 denier polyamide Available in 40 mic thickness, cut widths 0,37 and 0,25 mm in silver, gold and colours. Other widths are available upon request.

Composition:

Polyester/Aluminium/Polyamide 45/41/14

Dyeability:

Due to its construction, M-A-MX is resistant to piece dyeing.

Care Label:

fuesers garne pflege get in contact now
fuesers garne check

Reinforced yarn NX

Areas of Application:

Knitting, twisting and weaving

Contray to most other metallic yarn the transparent or silver metallised NX yarn is made of 100% Polyamide. I is mostly used to be Polyamide piece dyed to achieve a subtle tone-in-tone sheen. Due to the 2 x 20 monifil PA support the tape yarn is reinforced considerably and is especially suitable for use in weaving and knitting

construction

Construction Sketch:

fuesers garne check

Transparent polyamide film available in 15 mic or as 2-ply laminated silver metallised in 25 mic, each case twisted together with 2x20 den Polyamide monofilament

Composition:

100 % Polyamide

Dyeability:

NX can be dyed using the polyamide dye process (acid dye) NX is also resistant to cationic dyeing.

  • suitable for all products which will be yarn or piece dyed.
  • for fancy yarn which will be dyed, e.g. chenille
  • bright or metallic effects in all colours

Care Label:

fuesers garne pflege get in contact now
fuesers garne check

Reinforced yarn MX MATT

Areas of Application:

Flat and circular knitting, large and narrow weaving, braiding, twisting, trimming and embroidery

Due to the increase in tensile strength which results from supporting the metallic tape, this yarn is widely used in nearly all textile processing techniques.

construction

Constructon Sketch:

fuesers garne daten

Metallised polyester film, available in 12 mic thickness, in the standard width of 0.37mm. Further widths are available upon request.

Composition:

Polyester/Polyamide

Dyeability:

The metallic yarn used to make this product is not guarantied to withstand the piece dyeing process.

Care Label:

fuesers garne pflege get in contact now
fuesers garne check

Reinforced yarn MX FR

Areas of Application:

Knitting, weaving, production of effect yarn

MX-FR is the first metallic yarn that has a flame retardant property. This product category becomes possible within product ranges targeted at contract business like hotels, theatres, airports etc. MX-FR is a particularly important innovation from Fuesers Garne. Corneta M-FR is available in transparent and silver metallised. The tape is supported by a flame retardant Polyester monofilament.

construction

Composition:

100% Polyester

Dyeability:

Good colour absorption of the transparent tape expected. The use of the laminated silver MX-FR is probably going to harm or destroy the laminate. We strongly advise to conduct tests before dyeing any MX-FR yarn supplied

Care label:

fuesers garne pflege get in contact now